manualshive.com logo in svg

Advanced Instruments OsmoPRO, Руководство пользователя

Поделиться
Скачать
Advanced Instruments OsmoPRO Скачать руководство пользователя страница 11

OsmoPRO MAX Automated Osmometer User Guide

11

WARNING: To reduce the risk of bodily injury, electric 
shock, fire, and damage to your instrument, please read 
and observe all precautions in this user guide.

Only operate this product in accordance with the 
equipment design, operating instructions, and 
manufacturer recommendations; to do otherwise may 
impair the instrument function or create a safety hazard.

Do not attempt to perform electrical work if you are not 
fully qualified. This guide is not a substitute for electrical 
training.

Operator Training

This user’s guide provides information to qualified 
clinical technicians and technologists who have 
completed comparable vocational training.

Training and experience in the health risks of biological 
substances is required:

Safety Equipment

When working with the device, take measures according 
to lab regulations and wear protective clothing:

• 

Protective gloves

• 

Lab coat

Guidelines and Regulations to Follow

• 

All safety instructions in this user’s guide

• 

The environmental, installation, and connection 
specifications in the user manual

• 

National and international regulations pertaining to 
laboratory work

• 

Original spare parts and tools made or recommended 
by Advanced Instruments

• 

Good Laboratory Practice (GLP)

• 

Accident prevention regulations published by the 
accident insurance companies for laboratory work

• 

Power cable: Defective power cables are not to be 
used to connect the instrument and the power supply 
system.

• 

Power strip: If several instruments are connected to 
one power strip, always consider the maximum power 
consumption of each device.

• 

Power supply: Only connect instruments to voltage 
sources, whose voltage equals the instrument’s 
voltage.

Where is Use of the Instrument Prohibited?

Never use the instrument in a potentially explosive 
atmosphere without appropriate protective equipment. 
For further information, contact Advanced Instruments 
Technical Support (see 

Contacting Advanced 

Instruments

).

Secure Decommissioning

Take the instrument completely out of operation at any 
time by either switching off the power switch or by 
disconnecting the power plug.

If you need to decommission the instrument long-term, 
see 

Shutting Down the Instrument for Shipping or 

Long-term Storage

.

CAUTION: 

Except to remove the shipping stop when 

installing the instrument, do not remove the back and 
side panels. These should only by Advanced Instruments 
Technical Service personnel or any company authorized 
by Advanced Instruments.

Safe

 U

se

Содержание OsmoPRO




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды