ADS 507165 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 535

ADS 507165 Скачать руководство пользователя страница 38

1-30 ADS

Manual

Product Warranty

This section includes the warranty information for the ADS

£

flow monitor.

New Product Warranty

All new products manufactured by ADS will be free from defects in
material and workmanship for up to one (1) year following the
delivery date to the customer with one exception; the Long Range
Depth Sensor is under warranty for up to two (2) years. During this
warranty period, upon satisfactory proof of a defect, the product
may be returned for repair or replacement, at ADS

’s sole option.

No returns will be accepted unless the Owner has prepaid shipping
and has received a prior authorization return number from ADS.
Please contact ADS to obtain an authorization return number.
Warranty repairs and replacements will be performed only by ADS.
Any unauthorized repair or replacement will void this product
warranty.  Any repair or replacement will be covered by this new
product warranty for ninety (90) days from the date that such
repaired or replaced product is shipped from ADS. This warranty is
available only if the product has been installed and operated in
accordance with the procedures outlined in the ADS Operations and
Maintenance Manual.  This warranty does not apply to damage by
catastrophes of nature, fire, explosion, acts of God (including, but
not limited to, lightning damage and power surges), accidents,
improper use or service, damage during transportation, or other
similar causes beyond ADS

’s control.

Out-of-Warranty Product Repairs

After the new product warranty expires, a product may be returned,
at the ow

ner’s prepaid expense, to ADS for repair. The owner will

pay for all parts and labor associated with the repair. Any repair

«
...
36
37
38
39
40
...
»

Содержание 507165
























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов