manualshive.com logo in svg

ABB Relion RES670, Техническое руководство, Страница: 755 / 934

Поделиться
Скачать
ABB Relion RES670 Скачать руководство пользователя страница 755

Table 577:

Authority-related IED functions

Function

Description

Authority status

ATHSTAT

This function is an indication function block for user logon activity.

User denied attempt to logon and user successful logon are reported.

Authority check

ATHCHCK

To safeguard the interests of our customers, both the IED and the tools that are

accessing the IED are protected, by means of authorization handling. The

authorization handling of the IED and the PCM600 is implemented at both access

points to the IED:

•

local, through the local HMI

•

remote, through the communication ports

The IED users can be created, deleted and edited only in the CAM server.

Authority

management

AUTHMAN

This function enables/disables the maintenance menu. It also controls the

maintenance menu logon time out.

For more information on the functions Authority Management (AUTHMAN),
Authority Status (ATHSTAT), and Authority Check (ATHCHCK) functions, refer to
chapter “Basic IED functions” in the Technical Manual.

21.2 

Authority management AUTHMAN

21.2.1 

Identification

GUID-7925E6A3-301D-44A5-982F-167805EEA473 v1

Function description

IEC 61850

identification

IEC 60617

identification

ANSI/IEEE C37.2

device number

Authority management

AUTHMAN

-

-

21.2.2 

AUTHMAN

GUID-AF7EDB44-42AA-4D49-BFA0-DA6A9B43973E v1

This function enables/disables the maintenance menu. It also controls the maintenance
menu log on time out.

21.2.3 

Settings

PID-6837-SETTINGS v2

Table 578:

AUTHMAN Non group settings (basic)

Name

Values (Range)

Unit

Step

Default

Description

MaintMenuEnable

Disable

Enable

-

-

Enable

Maintenance menu enable

AuthTimeout

600 - 3600

s

600

600

Authority blocking timeout

1MRK 511 408-UUS A

Section 21

Security

Phasor measurement unit RES670 2.2 ANSI

749

Technical manual

Содержание Relion RES670







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов