ABB Relion RES670, Техническое руководство

Страница: 506 / 934

Name Values (Range) Unit Step Default Description
IA_RepTyp Cyclic
Deadband
Int deadband
Db & Cyclic 5s
Db & Cyclic 30s
Db & Cyclic 1min
- - Cyclic Reporting type
IA_AngDbRepInt 1 - 100000 s 1 10 Cyclic report interval (s)
IB_DbRepInt 1 - 100000 Type 1 10 Cycl: Report interval (s), Db: In 0,001% of
range, Int Db: In 0,001%s
IB_Min 0.0 - 500.0 %IB 0.1 50.0 Minimum value in % of IBase
IB_Max 0.0 - 500.0 %IB 0.1 200.0 Maximum value in % of IBase
IB_RepTyp Cyclic
Deadband
Int deadband
Db & Cyclic 5s
Db & Cyclic 30s
Db & Cyclic 1min
- - Cyclic Reporting type
IB_AngDbRepInt 1 - 100000 s 1 10 Cyclic report interval (s)
IC_DbRepInt 1 - 100000 Type 1 10 Cycl: Report interval (s), Db: In 0,001% of
range, Int Db: In 0,001%s
IC_Min 0.0 - 500.0 %IB 0.1 50.0 Minimum value in % of IBase
IC_Max 0.0 - 500.0 %IB 0.1 200.0 Maximum value in % of IBase
IC_RepTyp Cyclic
Deadband
Int deadband
Db & Cyclic 5s
Db & Cyclic 30s
Db & Cyclic 1min
- - Cyclic Reporting type
IC_AngDbRepInt 1 - 100000 s 1 10 Cyclic report interval (s)
Table 378: CMMXU Non group settings (advanced)
Name Values (Range) Unit Step Default Description
IA_ZeroDb 0 - 100000 m% 500 1000 Magnitude zero point clamping in 0,001% of
range
IA_HiHiLim 0.0 - 500.0 %IB 0.1 150.0 High High limit in % of IBase
IA_HiLim 0.0 - 500.0 %IB 0.1 120.0 High limit in % of IBase
IMagComp5 -10.000 - 10.000 % 0.001 0.000 Magnitude factor to calibrate current at 5% of
In
IMagComp30 -10.000 - 10.000 % 0.001 0.000 Magnitude factor to calibrate current at 30%
of In
IA_LowLim 0.0 - 500.0 %IB 0.1 80.0 Low limit in % of IBase
IA_LowLowLim 0.0 - 500.0 %IB 0.1 60.0 Low Low limit in % of IBase
IMagComp100 -10.000 - 10.000 % 0.001 0.000 Magnitude factor to calibrate current at 100%
of In
Table continues on next page
Section 16
1MRK 511 408-UUS A
Monitoring
500 Phasor measurement unit RES670 2.2 ANSI
Technical manual