ABB Relion RES670, Техническое руководство

Страница: 705 / 934

Name Values (Range) Unit Step Default Description
GiNo1 Excluded
Included
- - Included Response and status change (GI)
GiNo2 Excluded
Included
- - Included Response and status change (GI)
GiNo3 Excluded
Included
- - Included Response and status change (GI)
GiNo4 Excluded
Included
- - Included Response and status change (GI)
GiNo5 Excluded
Included
- - Included Response and status change (GI)
GiNo6 Excluded
Included
- - Included Response and status change (GI)
GiNo7 Excluded
Included
- - Included Response and status change (GI)
GiNo8 Excluded
Included
- - Included Response and status change (GI)
GUID-86DE9DBA-BE2F-4CC9-B447-1D2D86849EFF v2
The FunctionType parameter associates a particular instance of the function block
with a FUN. Refer to the IEC 60870-5-103 standard for details.
The InfNon parameters are used to associate each individual input signal with a
userdefined INF. Refer to the IEC 60870-5-103 standard for details.
The TypNon parameters determine if messages use absolute or relative time. This
adheres to the TYPE IDENTIFICATION (TYP) message types 1 (time-tagged
message) and 2 (time-tagged message with relative time) of the IEC 60870-5-103
standard.
The GiNon parameters determine whether a message is sent as a part of a GI reply or
not. Refer to the IEC 60870-5-103 standard for details.
19.7.10 Function commands for IEC 60870-5-103 I103CMD
19.7.10.1 Functionality
GUID-973929FE-292B-42A5-ACF9-BC95E2B16AE1 v2
I103CMD is a command function block in control direction with pre-defined output
signals. The signals are in steady state, not pulsed, and stored in the IED in case of
restart.
1MRK 511 408-UUS A
Section 19
Station communication
Phasor measurement unit RES670 2.2 ANSI 699
Technical manual