ZXR10 5900E Series Configuration Guide (IPv6)
Command Output
Description
Group
The address and mask of the broadcast group that selects
the RP.
RP
The address of the secondary RP advertised by the broadcast
group.
Protocol
Protocol.
RPF
RPF type and the interface address.
Info source
RP information source.
Expires
The time the secondary RP expires.
Group
Address and the mask of the broadcast group that selects
the RP.
The following example shows the outputs of the
show ipv6 pim rp hash
command:
ZXR10(config-mcast-ipv6-pim)#show ipv6 pim rp hash ff88::2
rp address: 2001::20
The outputs of the
show ipv6 pim rp hash
command are described as follows:
Command Output
Description
rp address
RP address selected by a specific multicast group
The following example shows the outputs of the
show ipv6 pim interface
command:
ZXR10#show ipv6 pim interface vlan1
Interface
State
Nbr
Hello
DR
Count
Period
Priority
vlan1
Up
1
30
1
Address: fe80::2e0:d0ff:fe21:203
DR
: fe80::2e0:d0ff:fe21:205
The outputs of the
show ipv6 pim interface
command are described as follows:
Command Output
Description
Address
Interface address
Interface
Interface name
NbrCount
Number of neighbors
State
Interface state up/down
HelloPeriod
Intervals of sending Hello messages
DR Priority
DR priority of this interface
DR
The DR of the interface
The following example shows the outputs of the
show ipv6 pim neighbor
command:
13-12
SJ-20150114102049-011|2015-01-15 (R1.0)
ZTE Proprietary and Confidential
