Chapter 2 NDP Configuration
Command Output
Description
Probe: The neighbor reachability is indeterminate. A probe
message is sent to verify the reachability.
Interface
Indicates the interface name of the entry.
2.4 NDP Configuration Example
General Description
This example describes how to configure static entries in the NDP neighbor cache table
of the interface VLAN10 on a switch.
Method
1.
Enter the interface configuration mode, and add a static entry to the neighbor cache
table.
2.
Show the content of the neighbor cache table, and check whether the static entry has
been successfully added.
Steps
Router configuration:
ZXR10(config)#interface vlan10
ZXR10(config-if-vlan10)#nd6 add 780::1 0000.0a00.1345
Verification
Verify the configuration results on the router:
ZXR10#show nd6 cache
Total Cache Number Is:1
Only Current Valid Items Are Shown Below:
Address
link-Address
age
status
Interface
780::1
0000.0a00.1345
static
Reachable
vlan10
The above results indicate that a static entry has been successfully added to the NDP
neighbor cache table.
2-7
SJ-20150114102049-011|2015-01-15 (R1.0)
ZTE Proprietary and Confidential
