Zte ZXR10 5900E Series, Configuration Manual

Page: 154 / 226

ZXR10 5900E Series Configuration Guide (IPv6)
Parameter Description
< seconds > Time value, in the range of 1-25, in the unit of second, with
the default value of 10.
For a description of the parameters in Step 3, refer to the following table:
Parameter Description
< seconds > Querier timeout period, in the range of 60-300, in the unit of
second, with the default value of 255.
For a description of the parameters in Step 4, refer to the following table:
Parameter Description
< seconds > Query interval, in the range of 1-25, in the unit of second, with
the default value of 1.
For a description of the parameters in Step 5, refer to the following table:
Parameter Description
< times > Robust variable. Range: 2–7, default: 2.
12.3 Maintaining MLD
To maintain MLD , run the following commands:
Command Function
ZXR10#
show ipv6 mld interface
[< interface-name >] Shows MLD configuration on an
interface.
ZXR10#
show ipv6 mld groups
{[< interface-name >]
,
[< group-address
>]}[
detail
]
Shows MLD group join information
on an interface.
ZXR10#
show ipv6 mld packet-count
[< interface-name >] Shows statistics counts of MLD
protocol messages sent and
received.
ZXR10#
clear ipv6 mld groups
[<
interface-name
>] Clears multicast groups that are
joined dynamically.
ZXR10#
clear ipv6 mld packet-count
[<
interface-name
>] Clears statistics counts of MLD
protocol messages sent and
received.
For a description of the parameters, refer to the following table:
12-6
SJ-20150114102049-011|2015-01-15 (R1.0) ZTE Proprietary and Confidential