Zte ZXR10 5900E Series, Configuration Manual

Page: 66 / 226

ZXR10 5900E Series Configuration Guide (IPv6)
Step Command Function
1
ZXR10(config)#
ipv6 router rip
Enters the RIPng
configuration mode.
2
ZXR10(config-ripng)#
default-metric
< metric > Sets the default metric of
routes in the range of 1-16.
l
Configures the summarized routes of the RIPng:
Step Command Function
1
ZXR10(config)#
ipv6 router rip
Enters the RIPng
configuration mode.
2
ZXR10(config-ripng)#
summary-prefix
X:X::X:X/
<
0-128
>
Configures the summarized
routes of the RIPng.
The command parameters in step 2 are described as follows:
Parameter Description
X:X::X:X/
<
0-128
> Indicates the IPv6 route prefix and length of the
summarized routes.
l Configure the port for listening to RIPng multicast packets:
Step Command Function
1
ZXR10(config)#
ipv6 router rip
Enters the RIPng
configuration mode.
2
ZXR10(config-ripng)#
port
<
1-65535
> Specifies the port for listening
to multicast packets. The
value range is 1-65535. The
default value is 521.
l Configure the offset list of the RIPng:
Step Command Function
1
ZXR10(config)#
ipv6 router rip
Enters the RIPng
configuration mode.
2
ZXR10(config-ripng)#
offset-list
<
access-list-name
>{
in
| out }< offset >
Configures the offset list of
the RIPng.
The command parameters in step 2 are described as follows:
Parameter Description
<
access-list-name
> Specifies the ACL number with 1-31 characters.
6-4
SJ-20150114102049-011|2015-01-15 (R1.0) ZTE Proprietary and Confidential