Chapter 8 IS-ISv6 Configuration
Step
Command
Function
4.5
ZXR10(config-isis-0-af)#
summary-prefix
X:X::X:X/
<
0-128
>[
level-1
|
level-1-2
|
level-2
][
metric
<
metric-value
>]
Configures IS-ISv6 route
aggregation.
4.6
ZXR10(config-isis-0-af)#
route-leak
{
level 1
|
level
2
}
into
{
level2
|
level1
}[
route map
<
map tag
>]
Configures the leakage from
level-2 to level-1 routes.
4.7
ZXR10(config-isis-0-af)#
distribute-list route-map
<
map-tag
>
in
Configures IS-ISv6 route
filter policy.
For a description of the parameters in Step 1, refer to the following table:
Parameter
Description
vrf
<
vrf-name
>
Specifies the VRF name, which is a string of 1 to 32
characters.
Enable the IS-ISv6 protocol instance if the instance is not yet enabled, and then enter the
route configuration mode of the IS-ISv6 instance. Enable the IS-ISv6 VPN instance if VRF
is configured.
For a description of the parameters in Step 2.1, refer to the following table:
Parameter
Description
<
area-address
>
Specifies the area address, which is a hexadecimal string
of 1 to 13 bytes.
For a description of the parameters in Step 2.2, refer to the following table:
Parameter
Description
<
system-id
>
Specifies the System ID of the instance, which is a
hexadecimal string of 6 bytes in the form of xxxx.xxxx.xxxx.
range
<
range-number
>
Specifies the extensible range of the System ID. The
value range is 0-32. The default value is 0. The instance
will assume an ID ranging from System ID to System
ID+<range-number>.
The IS-ISv6 protocol cannot be enabled if the system-id is not set.
For a description of the parameters in Step 2.3, refer to the following table:
Parameter
Description
md5
|
text
Indicates that the authentication mode is MD5 or text
authentication.
level-1
|
level-2
Indicates the level to which the authentication mode applies.
8-5
SJ-20150114102049-011|2015-01-15 (R1.0)
ZTE Proprietary and Confidential
