ZOLL X Series, Operator'S Manual

Page: 96 / 344

Chapter 6 Monitoring ECG
6-6 www.zoll.com 9650-001355-01 Rev. M
Connecting the ECG Cable To the X Series Unit
The X Series unit accepts Welch Allyn Propaq
®
ECG cables as well as ZOLL
X Series ECG cables. Connect the ECG cable to the ECG connector on the left side of the X
Series unit as follows:
Figure 6-3 Connecting ECG Cable to X Series Unit
Selecting ECG Waveforms for Display
You can fit up to four waveforms on the X Series display. The first waveform at the top of the
display is always an ECG waveform. (If
Pads are not connected, the unit can be configured to
automatically default to another ECG lead.) In the following example, Lead
II
(RA-LL), is the
source of the ECG waveform trace:
06/06/2011
I, II,
III...
SYNC
12
CO
2
R