ZOLL X Series, Operator'S Manual

Page: 60 / 344

Chapter 2 Product Overview
2-20 www.zoll.com 9650-001355-01 Rev.M
Common Tasks
The section contains procedures for the following tasks:
•
“Setting the Date and Time” on page 2-20.
•
“Replacing a Battery Pack on the X Series” on page 2-22.
•
“Using Treatment Buttons” on page 2-22
Setting the Date and Time
The X Series Set Date and Time screen allows you to set the date the X Series will use and its
internal real time clock.
To set the X Series unit’s date and time:
1. On the X Series display screen navigate to and select the Date and Time field. The Set Date
And Time screen displays.
2.
Specify the date by navigating to the date fields ( Month , Day and Year ) and adjusting as
necessary.
3.
Specify the unit’s time by navigating to the time fields ( Hour , Minute , Seconds ) and
adjusting as necessary. The selections available in the Hour field depend on whether your
unit is configured for a 12 or 24 hour (default) clock.
Note: For systems with Clock Synchronization enabled, avoid changing the unit’s time
manually except at initial configuration.
4. When you are done indicating the date and time, select the Set Date and Time field to apply
your selections.