ZETRON 4000 Series, Installation Manual

Page: 396 / 418

Appendix F: IntegratorRD Buttons
396 025-9533Y
only with the DSP Dual Channel Card. This function controls the Channel Check IRR
only; it does not control the M3022 IRR or IntegratorIRR.
Patch
Patch
This button toggles the state (On/Off) of the patch path displayed on the Patch Path button
for the currently highlighted channel.
Patch Clear
This button clears the cross-channel patch on the path currently displayed on the Patch
Path button, if this console owns the patch.
Patch Path
This button allows the user to cycle through the available patch paths. The number of
paths available is dependant on the patching hardware installed (4048 - Enhanced Patch
Card with 8, 16, or 24 available paths, 4020 – Enhanced Patch Card with 8 or 16 available
paths (10 maximum usable)). If another console has activated a patch path, that path
number will be skipped on your console’s Patch Path button until it is released.
Patch Transmit
Following the selection of a cross-channel patch the user may wish to key up only those
channels included in the patch. The Patch Xmit key serves this purpose.
Monitor
Instant Monitor
Pressing the Inst Mon key will disable the coded squelch (PL) decoding for the
highlighted channel.
Monitor
Pressing the Mon key will disable the coded squelch (PL) decoding for the selected
channel(s).
Monitor A
Pressing the Monitor A key connects the highlighted channel's unselect audio to the
Monitor A speaker.