Radio System Management Program
340
Description of Screen Elements
This section describes the elements on the main screen.
Menu Bar
The menu bar contains menus and commands.
Table 115: Menu Bar
Incoming Message Display
Displays the last message received over the serial link.
Select Channel Area
Displays a list of active channels and their aliases. Highlighting a channel changes which
channel's information is displayed in the Channel Information display area.
Settings Area
Displays, and allows changes to, report settings, including Automatic/Manual, File/Printer
output enabled, and Raw data output enabled. Also displays the directory to which reports
and raw data files are written.
Menu
Command
Description
File
Exit
Exits the program. (Note that all current information is saved.)
Reports
Daily
Summary
Outputs the current data to a file and/or printer, if they are enabled
in the settings area. When selected, a file-naming windows dialog
will appear so you can choose the filename for the report data.
Port Settings,
COM Port
Selects the active serial port. You can choose COM1 through
COM4.
Port Settings,
Baud Rate
Selects the baud rate. You can choose 1200, 2400, 9600, or 19200.
The baud rate must match the STC's baud rate setting.
Options,
Active Channels
Set
Opens the screen that allows selection/deselection of active
channels and channel name aliases.
Options,
Data Collection Start
Time
Defines when the 24-hour report is generated. You can choose any
even-numbered hour in the day.
Options,
Report Generation
Destination
Setup
Printer
Sets printer, paper size, and layout options.
Options,
Report Generation
Destination
Set Path
Sets path name for report files.
Help
About
Shows version number of program.
Summary of Contents for 4000 Series
