ZETRON 4000 Series, Installation Manual

Page: 266 / 418

IntegratorRDPS Programming
266 025-9533Y
Saving the Information Entered
The
Save
menu selection allows you to edit or update the configuration file. To save the
configuration files, return to the main screen and click File, Save .
To change the configuration file name and/or the directory where it is stored, click
File,
Save As . From the Save As screen, select the desired directory and file name. The console
program requires the configuration name to have a “.CFG” extension.
Quitting RDPS
To quit the program from the main menu, click File, Exit . When the program closes, if any
changes have been made, the program will ask if those changes should be saved. It is
suggested that you answer “ Y ” to this query.
Creating a Console Configuration
For each IntegratorRD workstation, you will need to create a configuration consisting of
several files. To create a configuration, perform the steps described in this section. This
serves as a high-level guide to the proper order of initial configuration.
1. Name the configuration.
2. Define the radio channel specifications.
3. Enter the system-specific definitions, including:
a. Auxiliary I/O
b. Console positions enable
c. Console position cross muting
4. Enter the position-dependent definitions, including:
a. Position setup - Audio and display
b. Paging Encoder Definition (optional)
c. Instant Call Paging setup (optional)
d. Alarm setup (optional)
e. Miscellaneous Position Parameters
f. Audio Panel and Expansion Panel Keyboard Layout
g. Window Button Arrangement
Caution! Do not save the configuration file to a shared network location.
Using a configuration file from a shared network location
among multiple consoles can cause mismatched configuration
problems.
!