ZETRON 4000 Series, Installation Manual

Page: 287 / 418

287
System-Specific Definitions
Confirmation (MDC-1200 Commands)
Miscellaneous Parameters
Figure 65: (Miscellaneous) System Parameters window
Call Alert Call alert is a no-voice transmission call to a particular radio ID.
Emergency Alert Emergency alert is a radio channel declaring an emergency.
Emergency
Acknowledge
This message is sent as a response to an emergency alert to the
radio that sends the emergency.
Radio Check Radio check is sent to a radio ID requesting its acknowledgement.
Status Request Status request is sent to a radio ID requesting its current status.
Status Update Status update is sent to an MDC-1200 channel to update its status.
Radio Disable* This message is sent to a radio to disable itself.
Radio Enable* This message is sent to a radio to re-enable itself.
Remote Monitor*
Disable
This message is addressed to a radio to instruct it to close its
microphone.
Remote Monitor*
Enable
This message is addressed to a radio to instruct it to open its
microphone.
* These commands can be selectively password-protected by enabling them in the
Password section.
Tip Navigate to this area from the main window in RDPS by clicking on
the
CCE cards
in the upper right, then
System Parameters,
Miscellaneous Parameters .