ZETRON 4000 Series, Installation Manual

Page: 341 / 418

341
RSMP Operation
Channel Information display area
Displays the Radio System Management information for the highlighted channel. The Tx
and Rx Time are displayed in minutes. Data is collected for all channels, but displayed one
channel at a time.
Console Information display area
Displays the console information currently being collected. The total Tx Time is displayed
in minutes.
Time and Date display
Displays the current time and date. This time is for display only, and is not used in any
calculations or reporting. The time display is updated once per minute but every radio
message has its own exact timestamp so Rx and Tx times will be calculated accurately.
Setup
This section describes how to set up the program. Setup involves designating active
channels, assigning aliases, setting the com port, configuring reports, and selecting a
printer.
Activate Channels and Set Aliases
Activate the channels you want included in reports. You can click Cancel to exit without
saving changes. To set active channels:
1. From the Options menu, click Channels and then Set. This will display the channel
selection screen (see Figure 100 ).
2. To enable all forty-eight channels, click ENABLE All Channels.
3. To disable all forty-eight channels, click DISABLE All Channels.
4. To enable or disable individual channels, check or uncheck the box next to the
channel. For example, if your system has channels 1-32 installed, disable 33-48
since there will be no activity on those channels.
Note
The time displayed at the bottom of the main screen is for display
only. Depending on the amount of radio activity and the speed of
the computer running the program, the seconds display may lose
time occasionally. This has no effect on the accuracy of the time
reporting function in the Radio Management program, and the time
displayed will be updated to the actual time once per minute.
Note There is no adverse effect to activating a channel that is not
installed on the CCE (channels 21 through 48 on a Model 4020, for
example).