ZETRON 4000 Series, Installation Manual

Page: 398 / 418

Appendix F: IntegratorRD Buttons
398 025-9533Y
Main - Standby
For channels that have been configured for general main/standby operation, the Main/Stby
key allows the user to toggle the state of the main/standby output for a channel. The state
of the output will be shown in the channel module display.
Play Last
The Play Last key is used only when a Model 3022 Instant Recall Recorded is being
remotely controlled by the console. Pressing the Play Last key causes the last recording on
the 3022 to be played.
Review ANI
When the console is called from a field unit using ANI (automatic number identification),
the unit number (or alias) will be shown in a field of the channel module display. To clear
identification, highlight the channel and press the Review ANI key. If more than one ANI
has been received the ANI identification will have a flashing “bullet” appended to the ID.
The Review ANI key will remove the displayed ID and display the next ID.
Repeater On and Off
The Rptr On and Rptr Off keys are used to enable and disable a base station repeater.
Self Repeat
Enabling Self Repeat on a channel will cause calls received on this channel to be
automatically retransmitted on the same channel. Self Repeat functionality requires a 4-
wire channel with full duplex enabled.
DVP Coded and Clear
The Digital Voice Privacy Coded and Clear keys are used to enable and disable a base
station encryption using tone remote sequence.
Entry Clear
This key is used to clear the entry area.
Transmit
Console Icom Talk
In a system with multiple dispatch positions, it is possible for the dispatchers to talk with
one another using the console intercom. This is done by first establishing the audio path
from the Console Icom menu and then pressing the Console Icom Talk key to talk.