ZETRON 4000 Series, Installation Manual

Page: 4 / 418

4 025-9533Y
Safety Summary
• Follow all warnings and instructions marked on the equipment or included in documentation.
• Only technically qualified service personnel are permitted to install or service the equipment.
• Be aware of and avoid contact with areas subject to high voltage or amperage. Because some
components can store dangerous charges even after power is disconnected, always discharge
components before touching.
• Never insert objects of any kind through openings in the equipment. Conductive foreign objects
could produce a short circuit that could cause fire, electrical shock, or equipment damage.
• Remove rings, watches, and other metallic objects from your body before opening equipment.
These could be electrical shock or burn hazards.
• Ensure that a proper electrostatic discharge device is used, to prevent damage to electronic
components.
• Do not attempt internal service of equipment unless another person, capable of rendering aid
and resuscitation, is present.
• Do not work near rotating fans unless absolutely necessary. Exercise caution to prevent fans
from taking in foreign objects, including hair, clothing, and loose objects.
• Use care when moving equipment, especially rack-mounted modules, which could become
unstable. Certain items may be heavy. Use proper care when lifting.
Change List for Rev T, June 2013
• Updated Orion Dual Channel Wireless Control Card Configuration on page 133.
• Updated
Radio Programming
on page 145 with new step.
• Updated Wireless Dual Channel Card Configuration (P/N 950-1113) on page 147.
• Updated Figure 33 on page 151.
• Added Harris Wireless Interface Module on page 152
Change List for Rev U, July 2014
• Added the options available for dual RS-422 Serial Interfaces on page 239 and 242
• The IntegratorRD Workstation, P/N 901-9569 is obsolete and is removed from the PC
Configuration section on page 246
• Change Minimum System requirements (per 011-0830_D) in Table 92 on page 246
• Include Win7 setup instructions in the Windows 7 Settings section on page 248
Change List for Rev V, December 2015
• In System Functions, under the subheading Patch Keys, removed a reference to an obsoleted
option, the Quad Patch card, see Patch Keys on page 381
Warning! For your safety and the protection of the equipment, observe these
precautions when installing or servicing Zetron equipment:
STOP