ZETRON 4000 Series, Installation Manual

Page: 289 / 418

289
System-Specific Definitions
Logging Options
This window is used to configure call data logging and diagnostic logging.
Enable Call Logging
saves call data in daily log files.
Enable Diagnostic Logging
saves
diagnostic data in hourly log files. This diagnostic data tracks communication between
CIC and consoles and records critical errors and miscellaneous information. Diagnostic
logging data is used by Zetron for troubleshooting.
The log files are saved to the folder specified in Storage Location . Disk Allocation sets
the maximum amount of drive space to use for log files. When this limit is reached, the
oldest log files are deleted as needed to make room for newer log files.
Default location for log files in Windows XP:
C:\Documents and Settings\All Users\Documents\Zetron\IntegratorRD\CallLogs
C:\Documents and Settings\All Users\Documents\Zetron\IntegratorRD\DiagnosticLogs
Default location for log files in Windows 7:
C:\Users\Public\Public Documents\Zetron\IntegratorRD\CallLogs
C:\Users\Public\Public Documents\Zetron\IntegratorRD\DiagnosticLogs
Defining Radio Groups
• iDEN Radio Groups on page 290
• SDC Radio Groups on page 290
• Defining MAP27 Radio Groups on page 291
•
Defining MDC-1200 Radio Groups
on page 292
Tip Navigate to this area from the main window in RDPS by clicking on
the
CCE cards
in the upper right, then
System Parameters,
Logging Options .
Note This is the default location for the current version of IntegratorRD.
The default location for prior versions varies.