ZETRON 4000 Series, Installation Manual

Page: 127 / 418

127
MAP27 Wireless Interface Option
Next, add a dispatcher assigned to the associated Map27 port and set the privileges and
associated groups for this user.

To configure the Dispatcher Units
1. Start the M827BASE for Windows application.
2. Navigate to
Fleet Configuration Editor
,
Edit
,
Dispatcher Units Editor
.
3. Select the Dispatcher Unit Name , the Member of Fleet number (Fleets must be
defined with their applicable Sites), and the
Unit Number
.
4. Enable Unit is valid .
5. Enter the
MAP27 Data Port Assignment
.
6. Enter the Direct Dial Number .
7. Define the user-defined control capabilities by enabling the appropriate controls
(System Control Allowed, Repeater Control Allowed, User Control Allowed (with
or without Same Fleet Only, and/or Alarm Control Allowed).
8. Assign the Associated Groups .
9. Select the General and Roaming
Classes of Service
(COS).
10. Save the data record to the database.