ZETRON 4000 Series, Installation Manual

Page: 160 / 418

Console Installation
160 025-9533Y
Configuring a Console
A console has several jumper-selectable configuration options that show the various
options and the normal factory setting. Table 65 shows the options and the default factory
setting.
Table 65: Model 4018 Jumper-Selectable Configuration Options
OPTION NAME SETTING
Select Speaker/Headset & Handset audio
Select audio to select speaker JP6-A
Select audio switch under software control JP6-B *
Select audio to handset/headset interface JP6-C
Unselect Speaker/Headset & Handset audio
Unselect audio always to unselect speaker JP3-A *
Unselect audio switch under software control JP3-B
Unselect audio to handset/headset interface
JP3-C
Headset/Handset Unselect Monitor
Unselect audio open to handset/headset JP4-A *
Unselect audio to handset/headset interface JP4-B
Auxiliary Audio to Select audio
Auxiliary Audio input open JP2-A *
Auxiliary Audio input to Select audio JP2-B
Auxiliary Audio input impedance
Auxiliary Audio 600 ohm impedance JP5-A *
Auxiliary Audio 10 k  impedance JP5-B
Recorder Output & VU meter
Unselect audio open JP1-A *
Unselect audio to Recorder Output and VU JP1-B
Operator Paging/Alert Audio
Operator audio to Select speaker JP10-A *
Operator audio to Unselect speaker JP10-B
* Factory default.
JP7, JP8, and JP9 are not used.