357
Message Content: Messages From Consoles
Message Content: Messages From Consoles
For All CIC Card Messages:
[Source]
[S1][S2] is the source console number
Range 01-16
[Dest]
[D1][D2] is the destination channel number
01-48 - specific channel number
DD – all channels
Channel Transmit On (Local)
[Command]
= ‘T’
[Rmt. Param]
= ‘XX’ for none.
Example: >02/19/1998 13:40:30.47 T 04 12 XX 06
(Console 4 to Channel 12, Transmit on)
Channel Transmit On With Remote Function
[Command]
= ‘T’
(this is intentionally the same command as Local Transmit)
[Rmt. Param]
= [P1] – The remote parameters are identified in the Remote Function
Parameters table,
.
Example: >02/19/1998 13:40:21.37 T 01 46 TD 63
(Console 1 to Channel 46, TX w/tone frequency F1)
Channel Transmit On With Dual Remote Function
[Command]
= ‘D’
[Rmt. Param]
= [P1] [P1] – The remote parameters are identified in the Remote Function
Parameters table,
.
Example: >03/05/2002 04:05:34.62 D 02 07 TD TC 5F
(Console 2 to Channel 7, TX w/tone frequency F2)
Channel Site Intercom
[Command]
= ‘S’
[Rmt. Param]
= XX for none.
Example: >02/19/1998 13:40:30.47 S 01 17 XX 2B
(Console 1 to Channel 17, Site TX)
Summary of Contents for 4000 Series
