ZETRON 4000 Series, Installation Manual

Page: 164 / 418

Console Installation
164 025-9533Y
Configuring Model 4115B Console Expander
Up to three console expanders may be included in the data loop of the console. Each
console expander must have a unique “loop address”. Jumper JP1 may be placed in one of
three positions to determine the expander loop address (see Table 68 ). The jumper is
accessible at the opening at the panel rear.
Table 68: Model 4115 Loop Address Jumper JP1
Wiring the Dispatch Consoles
This section describes how to wire accessory items to the console. The descriptions here
are for generic accessories. For detailed information about Zetron accessories, refer to
Accessory Installation on page 219.
On the back of the dispatch console, there are connectors for connecting the console to the
power, CCE, additional rackmount consoles, and various accessory items. These
connectors are labeled as shown in the following table.
Table 69: Dispatch Console Connector Summary
For more detailed information concerning connections to the audio panels, see
Connecting
the Model 4217B Audio Panel on page 239 and Connecting the Model 4219 Console
Audio Interface
on page 242.
Address Position
1 A
2 B
3 C
Connector Description
Voice "VOICE" Jack to Common Control Equipment
Data "DATA" Jack to Common Control Equipment
Data/Loop In Loop Input Jack for Console Expander
Data/Loop Out Loop Output Jack for Console Expander
Headset Jack Hook-switch, Mic-switch, and Headset Signals
Aux Audio Auxiliary Input, Desk-mic, and Recorder Signals
Comb Data/Program CPSW Program Upload/Download Connector
Power Power