ZETRON 4000 Series, Installation Manual

Page: 239 / 418

239
Hardware Installation
Connecting the Model 4217B Audio Panel
The following table lists physical and power requirements for the M4217B audio panel.
Table 90: Cable part numbers for Model 4217B
The most common dual RS-422 serial PCI card is part number 802-0322. This is the older
card, not compatible with Windows 7, and it uses the older cables listed in Table 90 . There
are three serial interfaces that can be used including the dual RS-422 serial PCI card, part
number 950-1011, the dual RS-422 serial PCI-E card, part number 950-1253, and the dual
RS-422 Serial USB adapter, part number 950-1254 which are all Windows 7 compatible,
and use the newer cables listed in Table 90 .

Connecting the Model 4217B
1. Connect the 6-conductor modular telephone connector of the Audio Panel cable to
the jack marked DATA on the back of the Model 4217B Audio Panel. The 6-
conductor modular telephone cable is plugged into the jack marked VOICE on the
Model 4217B Audio Panel. This cable is then routed to the console VOICE
connection in the Common Control cabinet.
2. Attach the 9-conductor end of the Model 4217B Audio Panel cable to the PC
connector marked CON . See Figure 46 .
Audio Panel Specification
Panel/Chassis 19 in W  5.25 in H  5 in D
Weight 10 lb.
Component Specification
M4217B audio panel Up to 80 watts
PC, Monitor and audio panel 600 watts (approximate)
Warning!
The PC is delivered configured for 120 V operation. If 220V
operation is required, the voltage selection switch on the back
of the PC must be changed and the appropriate AC power
cable installed before applying power to the PC.
Name Part Number
Data to Audio Panel Cable 709-7921 (newer)
709-7550 (older)
Data to CCE Cable 709-7920 (newer)
709-7551 (older)
Voice-to-CCE 709-7000
Tip The newer cards have a label identifying which cables to use. The
older card has no label.
STOP