ZETRON 4000 Series, Installation Manual

Page: 285 / 418

285
System-Specific Definitions
MDC-1200 System Parameters
Figure 64: MDC-1200 System Parameters window
The parameters listed here are not shown in RDPS unless the Full-Featured MDC-1200
option is selected. Also, these features are not used by IntegratorRD consoles unless they
have the appropriate optional license installed at every position.
If Basic MDC-1200 is selected:
• No MDC-1200 encoding is supported
• MDC-1200 decoding supported are: emergency and non-emergency PTT ID
• Only Emergency Acknowledge and Emergency Tone channel parameters are
configurable, but the Extended Paging option for the console is required in order to
send the Ack as a message from the base station over the air
If Full-featured MDC-1200 is selected:
• MDC-1200 license is required per position
• All MDC-1200 encoding and decoding are supported
Tip Navigate to this area from the main window in RDPS by clicking on
the
CCE cards
in the upper right, then
System Parameters,
MDC-1200 System Parameters .
Caution! If a Zetron iRIM is in use, the Emerg Ack function is not
transmitted to the radio network due to design limitations.
!