ZETRON 4000 Series, Installation Manual

Page: 136 / 418

Wireless Interface Options
136 025-9533Y
11. The Vox Threshold options:
Log,Volume,voX enable,vox Threshold,vox Delay,<BS> : T
A:-18dB, B:-20dB, C:-22, D:-24, E:-26, F:-28, G:-30, H:-32,<BS> : #
Zetron recommends -18dB (
A
) for the initial setting. The setting can be adjusted
later if needed, during audio level adjustment procedures.
12. The Vox Delay options (default is 0.5sec):
Log,Volume,voX enable,vox Threshold,vox Delay,<BS> : D
A:0.5sec, B:1.0sec, C:1.5, D:2.0, E:2.5, F:3.0, G:3.5, H:4.0,<BS> : #
Zetron recommends 0.5sec ( A ).
13. When you are finished setting the options for a channel they are then stored. The
card then does a reset and displays the current settings, which should look similar
to this example:
Define,Review,Store,Init,<BS> : S DCC is Resetting ...
Orion v1.20, 2009-MAR-24
---Press <ESC> anytime to return to this menu---
?,Config :
DCC Serial_No:: 0000B4F6
--- 4048/4020 ChA/B number = 1/2
Active ChA config. ________
Ch Type = Orion
Diag. Log Enabled
Radio Volume=100%
VOX Enabled
VOX Threshold=-18dB
VOX Decay Time=0.5sec
Active ChB config. ________
Ch Type = Orion
Diag. Log Disabled
Radio Volume=100%
VOX Enabled
VOX Threshold=-32dB
VOX Decay Time=4.0sec
AudioDRAM installed = None or Bad.
Installation Connections
Interconnects
Connection to each channel of the Orion Dual Channel Wireless Control Card in the
common control equipment rack is made by way of the punchdown block (see Table 57
and Table 58 ).