ZETRON 4000 Series, Installation Manual

Page: 307 / 418

307
System-Specific Definitions
Trunk Patch
This selection allows the including of a trunking channel (such as LTR or EDACS) in a
cross-channel patch.
Select “Yes” or “No” to enable or disable patching involving trunking channels.
Instant Transmit Toggle
If this feature is enabled, the Instant Transmit button in IntegratorRD will toggle. While
this button is toggled ON, the channel windows are in instant transmit mode (touching/
clicking on the channel windows will instantly transmit on that channel while the channel
window/button is depressed). Likewise, transmission will end upon release of this channel
window/button.
There are side effects when Inst Xmit is toggled on:
• Channel windows are in instant transmit mode (touching/clicking on the channel
windows will instantly transmit on that channel while the channel window/button is
depressed). Transmission will end upon release of this channel window/button.
• The only way to select a single channel is to double-click the channel button. As a
side effect of the
Inst Xmit
toggled on, a brief instant transmit will occur during the
double-click.
• There is no way to highlight or simul-select channels. To perform either of these
tasks, first toggle Inst Xmit off.
• If Mouse Right-Click Transmit is also enabled, touching (or left-clicking on the
mouse) anywhere in the unassigned channel area will initiate a transmit on currently
selected channels. While this is by design, touch screen users may not realize the
consequences of this feature, as it is easier to accidentally transmit if they rest their
finger on the unassigned channel area.
Mouse Right-Click Transmit
Enable this feature to allow right-click transmit in the unassigned channel area. Right-
click transmit mimics the instant transmit feature of right-clicking on an unselected
channel, except the right-click occurs in the unoccupied region of the channel area. The
transmission occurs on the currently selected channel(s).
Pass Audio on First Channel
This feature is disabled by default. When disabled, IntegratorRD requires all selected
channels to be acquired prior to passing audio.
Enabling this feature causes in the following behavior. When a dispatcher initiates a
transmit request for multiple selected channels (simul-selecting multiple channels and
Note
Patching does not support MAP27 channels at this time.