ZETRON 4000 Series, Installation Manual

Page: 149 / 418

149
Harris M7300 Wireless Interface Option
Harris M-Series v2.02.0006, 2012-AUG-31
---Press <ESC> anytime to return to this menu---
?,Config : ?
DCC Serial_No:: 0000251E
--- 4048 ChA/B number = 5/6
Active ChA config. ________
Ch Type = Harris-M
Diag. Log Disabled
Radio Volume = 100%
VOX Enabled
VOX Threshold = -18dB
VOX Decay Time = 0.5sec
Active ChB config. ________
Ch Type = Harris-M
Diag. Log Disabled
Radio Volume = 100%
VOX Enabled
VOX Threshold = -18dB
VOX Decay Time = 0.5sec
AudioDRAM installed = 1 Mbyte
(Shown with VOX Enabled, Not Default)
Console Setup
Programming the Console
IntegratorRDPS is used to program the IntegratorRD console position. See
IntegratorRDPS Programming on page 259.
Channel Definition
To enable operation of a Harris radio channel, the channel must be specified using the
Edit
,
Channel Definitions
menu. For each channel in the system, the type "E/ORION"
must be specified for the Control Type field.
Control Buttons
There are several EDACS channel control buttons available for controlling the radio.
These buttons may be programmed to operate on the video screen or the audio panel. The
Edit , Screen Buttons and Edit , Keyboard Layout menus are used to program the button
and panel layouts (see Table 61 ). Some control buttons may be specific to the radio type.
Harris M7300 radios operate on Zetron equipment in the same manner as Orion radios.