ZETRON 4000 Series, Installation Manual

Page: 251 / 418

251
Software Installation
11. Set Hibernate after to Never .
12. Set
USB settings, USB selective suspend setting
to
Disabled
.
13. Set Power Button and lid, Power button action to Shut down .
14. Set
Start menu power button
to
Shut down
.
15. Set PCI Express, Link State Power Management to Off .
16. Set
Processor power management, System cooling policy
to
Active
.
17. Set Display, Turn off after to Never .
18. Set
Multimedia settings, When sharing media to Prevent idling
to
sleep
.
19. Click OK and close the window.

Setup Display Settings
1. Click Start, Control Panel, Appearance and Personalization, Personalization.
2. Select Screen Saver then None and OK .
3. Click
Start, Control Panel, Appearance and Personalization, Display.
4. Select Adjust Resolution . For each display, Set Resolution: to 1024x768 for <19”,
1280x1024 for >19”, and 1600x900 for widescreen. Set Colors: to Highest (32 bit) .
Software Installation
Systems delivered with a PC, the Integrator Radio Dispatch Software, and the Integrator
Radio Dispatch Programming Software (RDPS) are fully installed along with the console
configuration file based on information supplied prior to delivery. No further installation
is required. Installation discs are provided to allow the software to be reinstalled if
necessary. Programming software for IntegratorRD versions prior to 5.2 can be installed
on other PCs for off-line configuration purposes using the “Demo” format during
installation. IntegratorRD 5.2 and later versions require a separate disc available by
request from Zetron Sales.
If the system was purchased as individual components, the IntegratorRD disc will install
the RD display and RDPS software on the PC for the dispatch console, and the
IntegratorRD operational settings must be configured.