ZETRON 4000 Series, Installation Manual

Page: 257 / 418

257
Software Installation
Figure 48: Integrator Console Settings
Integrator Radio Dispatch Configuration Files
The Radio Dispatch software can be set to load the configuration file from a primary disk
location or a secondary location in the event the primary location is inaccessible. In a
system in which the console PCs are networked, it is typical for the primary location to be
a shared network file. If the network is unavailable when the console program starts, then
the program will reload the configuration from the secondary location, which would be on
the local PC hard disk.
If the console PCs are not networked, the primary location is a local hard disk file with the
secondary location being left blank. If configuration information is provided to Zetron
prior to delivery, the configuration file, which ends with the .CFG extension, is located in
the Integrator Radio Dispatch application directory. By default, this is:
C:\Program Files\Zetron\IntegratorRD (32-bit OS)
C:\Program Files (x86)\Zetron\IntegratorRD (64-bit OS)
Use the associated Browse button to locate the configuration file.
Note 1) COM3 and COM4 are shown as examples only. Your computer
settings may be different, depending on how the PC assigns them.
2) If a Model 3022 Instant Recall Recorder is included with the
system, and control is desired from the console, choose an unused
port available on the PC (excluding the ports used for the Audio
Panel and CIC connections).
3) The CAD I/F option is implemented for Computer Aided Dispatch
(CAD) applications. Contact Zetron for details.