ZETRON 4000 Series, Installation Manual

Page: 59 / 418

59
Configuring Channel Cards
EMERG: All,Only_1st,Timed,<BS> :
5. If you choose the timed option, select the timer duration.
60sec,30sec,15sec,5sec,<BS>
GE-Star ANI Decoding
The GE-Star ANI output format is described in
GE-Star ANI Decoding
on page
233.

To set GE-Star options
1. Press G to select GE-Star decoding.
Mode,Emerg,muTing<BS> :
2. Press M to access the GE-Star decode format menu.
A:system0,B:system1,C:system2,D:system3,E:11bit,
F:12bit,G:13bit,H:gs#4,I:gs#3,J:is#1,K:nysp<BS> :
3. Press a letter to choose a GE-Star format.
4. Backspace to the GE-Star menu.
Option Result
A All emergency ANI numbers are reported
O Only the first occurrence of an emergency ANI number is
reported. Subsequent repeats are ignored until a different ANI
number is received.
T A timer starts when an emergency ANI number is received.
Repeats of that number are ignored for the duration of the
timer. Any other emergency ANI number is reported and
restarts the timer.
A Multi-System 0 12-bit decode
B Multi-System 1 12-bit decode
C Multi-System 2 12-bit decode
D Multi-System 3 12-bit decode
E Standard 11-bit decode
F Mobile/Portable 12-bit decode
G Mobile/Portable 13-bit decode
H GE-Star #4 14-bit decode
I GE-Star #3 14-bit decode
J ID Star #1 14-bit decode
K NYSP See note.
Note
GE-Star NYSP (format K) is a special format reserved for NYSP.
Using this format requires a separate Zetron software license.