Xerox Nuvera 100, Service Manual

Page: 41 / 304

General Information 1-41
Electrical specifications
WARNING
Do not use extension cords of any length or gauge.
Primary line voltages 87–132 VAC (115 VAC nominal)
174–264 VAC (220 VAC nominal)
Input voltage range is auto-sensed.
Primary voltage 47–63 Hz frequency range
Power consumption 200 watts standby
300 watts at idle
600 watts during printing
Maximum power consumption is
1000 watts during warmup.
Current rating 115 VAC configuration:
8 amp max./1 amp min.
220 VAC configuration:
4 amp max./1 amp min.
Fusing
NOTE: Fuses are not user-accessible.
F1: (DC switcher) 6.3-amp slo blo
F2: (Drum heater 1, reservoir
heater 1, ink melt chambers, cap/
wipe/purge unit) 10-amp slo blo
F3: (Jet stack left and right, paper
pre-heaters, reservoir heaters 2, 3
and 4) 10-amp slo blo
Secondary voltages +5V
±
2.5%
+12 V
±
5%
-12 V
±
5%
+40 V -5%, +12%
-52 V
±
10%
+54 V
±
10%