Xerox Nuvera 100, Service Manual

Page: 267 / 304

Printer Networking 7-19
14. Select Not shared, and click Next.
15. If you want to print a Test page, select Yes, and click Finish.
Creating an AppleTalk Port
Adding an AppleTalk Port:
1. Click on Start, Settings, and Printers.
2. In the Printers dialog box, double-click Add Printer.
3. Select My Computer and click Next.
4. If the printer is connected to the network, click Add Port.
5. Double-click AppleTalk Printing Devices in the Printer
Ports dialog box (if the AppleTalk Printing Devices is not
available, contact your Windows NT Administrator).
6. Windows will now search for AppleTalk Printers (this may take
a few minutes). When your printer appears in the Available
AppleTalk Printing Devices, click on the printer name and
click OK.
7. At the prompt, Do you want to capture this AppleTalk
printing device?, click No.
8. When returned to the Printer Ports box, click Close.
9. At the Add Printer Wizard dialog box, click the box next to
this new port which will add a check mark. Click Next.
Installing the printer driver:
10. In the Add Printer Wizard dialog box, click Have Disk to
add a new Solid Inkjet 100.
11. Type the path name to the driver files. This can be:
d:\
(or the current location of your CD-ROM drive). Click OK.
12. Select the Sterling iiLINX Solid Inkjet 100. Click Next.
13. If prompted that a driver is already installed for this printer,
select Keep existing driver (recommended). Click Next.
If the printer driver does not exist, go to Step 15.
14. In the Printer name dialog box, give the printer a unique
name if another Sterling iiLINX Solid Inkjet 100 is installed
(for example: SIJ100-AppleTalk).
15. Select Not shared, and click Next.
16. If you want to print a Test page, select Yes, and click Finish.