Xerox Nuvera 100, Service Manual

Page: 34 / 304

1-34
ii LINX™ Solid Inkjet 100 Service Manual
Table 1-4. Configuration Page Settings (continued)
P a r a m e t e r Description Saved in
NVRAM
D e f a u l t Limits or alternate choices
Login Password Indicates whether or not a
network password has been set. yes Not set Set, Not set
Enable Banners Print banner yes No
Config Retry
Interval Time in seconds to wait before
retrying to configure yes 60 seconds
Queue Scan
Interval Rate at which printer will scan
queue for print jobs. yes 15 seconds An integer 1 through 300 in
seconds
Status Message
TCP/IP port
interpreter Indicates the type of interpreter in
use at the port. yes Not authorized, Disabled
Host Name
IP Address The Internet Protocol address.
If null, the address will be set
at run time via RARP or BOOTP. yes Not Set String of 15 or fewer characters of
the format N.N.N.N followed by the
word “Dynamic” if IP Address
Dynamic parameter is set to true.
Network Mask Indicates which fields of the
IP Address designate the
network portion and which
designate the node portion.
If null, the mask will be
determined from the printer’s
IP address or the BOOTP or
ICMP Netmask Reply. yes Default String of 15 or fewer characters of
the format N.N.N.N
Router/ Gateway A list of addresses of the
gateways to other networks.
yes None String of 15 or fewer characters of
the format N.N.N.N
Frame Data packet encapsulation
type for ARP/ RARP requests
and IP datagrams. yes DIX Adaptive, 802.2-SNAP. May be
followed by the word “Dynamic”
RARP Reverse Address Resolution
Protocol/ Boot Parameter
Protocol. Used for setting the
printer’s IP address from a boot
server. yes False True