![background image](http://html2.mh-extra.com/html/xerox/nuvera-100/nuvera-100_service-manual_3392260183.webp)
Cleaning and Maintenance
5-3
Cleaning Overview
The printer should be cleaned when any of the following symptoms
occur:
•
Light stripes appear in prints.
•
Ink smears or random streaks appear on the front or back of
prints.
•
Oily spots appear along the top of prints.
•
Mispicks or multiple picks occur at the media tray.
•
Persistent paper jams inside the printer or at the media tray.
•
Wiggly vertical stripes caused by too much oil created by a
dirty maintenance drawer blade.
Most print-quality and media-transport problems can be cured by
initiating cleaning procedures available through the printer’s front
panel menu.
Cleaning Supplies Required
The following cleaning supplies are required:
•
90% or higher, pure isopropyl alcohol
•
Lint-free wipes
•
Lint-free swabs
CAUTION
Do not use rubbing alcohol because it can contain water and oils
that leave undesirable residue on the printer parts. Never use water
to clean the printer’s internal components.
Appropriate cleaning procedures for specific print-quality or paper
transport problems are listed in Table 5-1.
Summary of Contents for Nuvera 100
