![background image](http://html2.mh-extra.com/html/xerox/nuvera-100/nuvera-100_service-manual_3392260254.webp)
7-6
ii LINX™ Solid Inkjet 100 Printer Service Manual
Setting IP Parameters—DHCP
Dynamic Host Configuration Protocol (DHCP) is a system in which
Windows NT servers can allocate IP addresses dynamically. Under
DHCP, the server gives the printer (called a DHCP client) an IP
address when the printer is reset.
1. When the front panel displays
READY TO PRINT
, press
the down-arrow button until Menu is highlighted. Press the
Select button.
2. Press the down-arrow button until Network Settings is
highlighted. Press the Select button.
3. Press the down-arrow button until TCP/IP is highlighted.
Press the Select button.
4. Press the down-arrow button until DHCP/BOOTP is
highlighted. Press the Select button to toggle the function on
(or off).
5. Press the down-arrow button until Exit is highlighted. Press
the Select button.
6. In order to turn on the DHCP/BOOTP interface, highlight
Reset Printer Now. Press the Select button.
You must reset the printer to turn on the DHCP/BOOTP interface.
The reset will take approximately 2 minutes to complete. The
printer will automatically print a Startup Page to confirm that the
function is on.
DHCP Transactions
•
On power up or reset, the printer sends a DHCP discover
packet, indicating its Ethernet address and requesting an IP
address.
•
The DHCP server responds to the discover packet with a
DHCP offer packet, which contains an IP address from within
the assigned scope and the assigned lease.
•
The printer examines the DHCP offer packet and decides
whether to accept the lease. The printer sends a request packet,
accepting the IP address and the lease.
NOTE: There can be multiple DHCP servers on the same network, each
defining its own scopes and leases. The printer selects the first lease
offered.
•
The DHCP server sends an acknowledgment packet to the
printer, which completes the transaction.
Summary of Contents for Nuvera 100
