Xerox Nuvera 100 Service Manual Download Page 96

Page: 96 / 304

2-18

iiLINX™ Solid Inkjet 100 Service Manual

Front Panel Status Messages

The Front Panel status messages and solutions are shown in
Table 2-2. The messages are listed in descending priority order.

Table 2-2. Front Panel Status Messages

Status Message

Solution

Warming up—Please wait

The printer is heating the ink; wait until

Ready to Print

displayed.

Ready to Print

The printer is ready to accept print jobs.

Ink low—Add ink

Check ink levels; add appropriate ink sticks to the correct
ink-loading bins.

Maintenance Kit is low. Only

Reorder a Maintenance Kit now. Replace Kit soon.

XX Pages remaining before empty.

Processing Data—Please wait

The printer is processing data; wait until

Ready to Print

or Printing is displayed.

Receiving data—Please wait

The printer is receiving data; wait until

Ready to Print

Printing

is displayed.

Printing—Please wait

A print job is printing; wait until

Ready to Print

displayed.

Warming up—Please wait

The printer is heating the ink; wait until

Ready to Print

displayed.

Warming up, Please wait.

The printer is heating the ink; warm up may take as long as

XX% complete

17 minutes; wait until

Ready to Print

is displayed.

Initializing

Initializing printer mechanisms—Please wait.

Cleaning

The printhead is being cleaned—Please wait.

Canceling print job—Please

You have selected Cancel; wait while the job is removed

wait.

from the queue.

Canceling Cleaning—Please

The current cleaning operation has been canceled.

wait.

Summary of Contents for Nuvera 100

















































































































































































































































































































Search results

Summary of Contents for Nuvera 100

Reviews:

Related manuals for Nuvera 100

Brands by name

Popular brands

Xerox Nuvera 100, Service Manual

Search results

Summary of Contents for Nuvera 100

Reviews:

Related manuals for Nuvera 100

Brands by name

Popular brands