Xerox Nuvera 100, Service Manual

Page: 261 / 304

Printer Networking 7-13
Verify Information and Finish the Configuration
After you have entered the configuration information, the Quick
Configuration Wizard displays the Configured Printer Information
dialog box, which reports the information you have entered.
1. Verify that the information is correct.
• If the information is correct, click Apply Changes.
• If the information is not correct, click Back to return to
previous dialog boxes and correct the information. Click
Next to return to the Configured Printer
Information dialog box. Click Apply Changes.
• To exit the wizard and return to the Main window
without making any changes, click Cancel.
2. After you click Apply Changes, the printer resets; the changes
take effect when the reset is complete.
3. After the reset, you are prompted to print a Test Page. It is
recommended that you print a Test Page to verify a successful
installation.
Setting IPX Frame Types from the Front Panel
1. When the front panel displays
READY TO PRINT
, press the
down-arrow button until Menu is highlighted. Press the
Select button.
2. Press the down-arrow button until Network Settings is
highlighted. Press the Select button.
3. Press the down-arrow button until NetWare is highlighted.
Press the Select button.
4. Press the down-arrow button until IPX Frame Type is
highlighted. Press the Select button.
5. Press the down-arrow button until the desired frame type is
highlighted. Press the Select button until On is displayed. If
desired, you can set more than one frame type.
6. To return the printer to normal operation, press the down-
arrow button until Exit is highlighted. Press the Select
button.