Xerox Nuvera 100, Service Manual

Page: 104 / 304

3-4
ii LINX™ Solid Inkjet 100 Service Manual
Printhead is in the print position but the cap/wipe/
purge assembly is in some unknown intermediate
position:
a. If the cap/wipe/purge assembly is not detected in its
home position, then the heaters in the printhead and
cap/wipe/purge assembly are activated in case the
printhead and cap/wipe/purge may be “glued” together
by cooled ink.
b. After waiting for the ink to melt, the cap/wipe/purge
assembly is lowered to its home position.
c. The process motor is rotated to tilt the printhead
forward (if not already forward), rotate all the rollers to
their ready positions, disengage the transfix roller and
lower the maintenance drawer blade and wiper.
d. The printhead is moved to its X-axis home position and
then centered.
e. A short wipe is performed and the cap/wipe/purge
assembly is returned to its home position.
4. The printhead is tilted back to the locked position.
5. The front panel displays a warm up message.
6. The heaters are enabled and the drum begins to rotate.
7. When the ink in the printhead is molten, the cap/wipe/purge
assembly is positioned to the purge position.
8. The printhead tilts forward and a purge cycle begins.
9. A cleaning page is printed.
10. The front panel displays a message that the printer is
initializing and then ready.
The print engine is initialized.