Xerox Nuvera 100, Service Manual

Page: 32 / 304

1-32
ii LINX™ Solid Inkjet 100 Service Manual
Table 1-4. Configuration Page Settings (continued)
P a r a m e t e r Description Saved in
NVRAM
D e f a u l t Limits or alternate choices
Last Config Time Last date the printer’s
configurations were altered
yes
SysAdmin contact Name of system administrator yes Empty string
Printer Location Physical location of printer
as set by system administrator
yes Empty string
P h a s e r S h a r e Indicates the type of Phaser
Share network card installed no Built-in Ethernet
Network Address A unique number for each
Ethernet-capable printer. yes Hardware-
dependent.
Legal values
have the
form
xx:xx:xx:xx:
xx: xx
EtherTalk Indicates the type of interpreter
in use at the port. yes PostScript
Level 2 Not installed, Disabled,
<interpreter> enabled
Language PostScript
Filtering Interpretation of special
characters yes None
Job Pipelining Indicates if multiple printfile
processing is allowed
yes Off On
Name The current name of the printer
as seen on a network yes Ii LINX SIJ
100 Any name defined by the customer
up to 32 characters in length.
Printer type Indicates the type of printer
installed at the port. LaserWriter Any string, 32 character or less
Zone Name assigned by network
administrator for the zone the
printer is assigned to. yes Any string, 32 characters or less
Network Node