Xerox Nuvera 100, Service Manual

Page: 253 / 304

Printer Networking 7-5
Setting IP Parameters from the Front Panel
1. When the front panel displays
READY TO PRINT
, press
the down-arrow button until Menu is highlighted. Press the
Select button.
2. Press the down-arrow button until Network Settings is
highlighted. Press the Select button.
3. Press the down-arrow button until TCP/IP is highlighted.
Press the Select button.
4. Set the IP address:
a. Press the down-arrow button until IP Address is
highlighted. Press the Select button.
b. Press the left- or right-arrow buttons to highlight the
3-digit part of the address that you want to set. Press the
up- or down-arrow keys to change the numbers.
c. When the address is set, press the Select button.
5. Set the network mask:
a. Press the down-arrow button until Network Mask is
highlighted. Press the Select button.
b. Press the left- or right-arrow buttons to highlight the
3-digit part of the address that you want to set. Press the
up- or down-arrow keys to change the numbers.
c. When the address is set, press the Select button.
6. Set the default router/gateway address:
a. Press the down-arrow button until Default
Router/Gateway Address is highlighted. Press the
Select button.
b. Press the left- or right-arrow buttons to highlight the
3-digit part of the address that you want to set. Press the
up- or down-arrow keys to change the numbers.
c. When the address is set, press the Select button.
7. To return the printer to normal operation, press the down-
arrow button until Exit is highlighted. Press the Select
button.
8. Press Reset Printer. All the information changes will take
effect after the printer resets.