Xerox Nuvera 100, Service Manual

Page: 51 / 304

General Information 1-51
Ink inlet
Piezoelectric crystals
High
* 300 dpi pixels
Inter-
mediate
Low
Clear
Manifolds
22 pixels*
22 pixels
11 pixels*
840-4-49
22 pixels*
Figure 1-19. Printhead Detail
The ink-jet array is bonded to a cast aluminum ink reservoir. The
reservoir supplies the molten ink to the ink-jet array. Heaters in the
reservoir and the ink-jet array maintain the ink at a temperature of
about 140
o C for printing. The level of the ink in the reservoir is kept
at a constant level.