![background image](http://html2.mh-extra.com/html/xerox/nuvera-100/nuvera-100_service-manual_3392260020.webp)
1-20
ii LINX™ Solid Inkjet 100 Service Manual
Preparation for Moving the Solid Inkjet 100 Printer and
Accessories
It is very important that you follow the correct repacking procedure
before shipping the Solid Inkjet 100 printer. Complete repacking is
required. Failure to properly repack the printer can damage the
printer’s internal components. You are responsible for any shipping
damage to the printer that results from improper or inadequate
packing.
Repacking for shipment consists of four basic tasks. Each of these
tasks is explained in detail. If you have questions regarding any of
the repacking procedures, call Sterling for assistance:
Sterling Diagnostic Imaging, Customer Care Center at (800) 252-
9099. Outside the U.S. and Canada, contact your local Sterling
Diagnostic Imaging service organization.
Overview
After reviewing this section, follow the more detailed processes which
follow to complete this task.
1.
Turn off the printer using the On/Off switch and then selecting
Shut Down For Moving Printer at the front panel.
2.
Remove the maintenance drawer, seal it in a plastic bag, and
store the tray on a flat surface.
NOTE: A used maintenance drawer leaks drum fluid if tipped.
3.
Make sure that the printer has completed its shut down before
moving the printer (after approximately 15 minutes, the front
panel goes blank). This allows the ink to solidify.
4.
Repack the printer and its accessories using the original
packing materials.
Turning off the Printer
CAUTION
To avoid damaging the printer’s internal components, always turn
the printer power off using the On/Off switch (this places the
printhead in the proper position for safe shipment). Failure to do so
may result in damage to the printer.
Never turn off the printer by
pulling the power cord.
Summary of Contents for Nuvera 100
