Xerox Nuvera 100, Service Manual

Page: 143 / 304

Troubleshooting 3-43
View Menu
Provides for changing various screens and major modes of operation
for the program.
• Tests – Switches to the 68K window to show results of test
running on the print engine.
• Erase Screen – Erases all the characters from the currently
selected window; it has no affect on the test running.
• Debug Check List Item – Enables or disables a trace of all
I/O between the user interface and the printer; it is off by
default.
• Test Stats – Lists the status of the last test sequence to run
Run Command
Executes a test sequence.
Next Command
Stops the currently running test and immediately starts the next test.
Stop Command
Stops the currently running test and stops the sequence in progress.
File Menu (Alt-F)
This menu controls the saving and loading of test selection sequences,
described above.
• New – Creates a new test selection sequence (deselects all
tests and erases their previous completion codes).
• Open – Opens an existing, previously saved file.
• Save – Saves the current test selections in the “current” file. If
the selection sequences is new (never been saved) the user is
prompted to specify a file name.
• save As – Saves the current test selections in a particular file.
• eXit (Alt-X) – Exits the diagnostic program.