Xerox Nuvera 100, Service Manual

Page: 266 / 304

7-18
ii LINX™ Solid Inkjet 100 Printer Service Manual
Creating Network Port Configuration
The Solid Inkjet printers support two types of network ports:
• LPR
• AppleTalk
The following procedure covers LPR ports; for information on
AppleTalk ports, refer to “Creating an AppleTalk Port” following this
section.
Creating LPR Printing
Adding an LPR port:
1. Click on Start, Settings, and Printers.
2. In the Printers dialog box, double-click Add Printer.
3. Select My Computer and click Next.
4. If the printer is connected to the network, click Add Port.
5. Double-click LPR Port in the Printer Ports dialog box (if the
LPR Port is not available, contact your Windows NT
Administrator).
6. In the Add LPR compatible printer dialog box, enter the
printer’s IP address in the box labeled Name or address of
server providing lpd. In the box labeled Name of printer
or print queue on that server, enter
PS
(in uppercase). Click
OK.
7. When returned to the Printer Ports box, click Close.
8. At the Add Printer Wizard dialog box, click the box next to
this new port; a check mark is added. Click Next.
Installing the Printer Driver:
9. In the Add Printer Wizard dialog box, click Have Disk to
add a new Solid Inkjet 100.
10. Type the path name to the driver files. This can be:
d:\
(or the current location of your CD-ROM drive). Click OK.
11. Select the Sterling iiLINX Solid Inkjet 100. Click Next.
12. If prompted that a driver is already installed for this printer,
select Keep existing driver (recommended). Click Next.
If the printer driver does not exist, go to Step 14.
13. In the Printer name dialog box, give the printer a unique
name if another Sterling iiLINX Solid Inkjet 100 is installed
(for example: SIJ100-Network).