6/98
Xerox DocuPrint N17 Service Manual
11-13
Envelope Feeder Option
Figure 11.3.5.1 One Way Clutch Assemblies Removal
Replacement
Perform the removal steps in reverse order.
NOTE: Align the lower half of the Torque Clutch Assembly with the pin on the shaft (See (13) in Figure
11.3.5.1).
NOTE: Position the Torque Clutch Assembly Stop to align with the Rotation-Prevention Bracket and slide
the upper half onto the lower half (See (14) in Figure 11.3.5.1).
NOTE: If the Envelope Feeder Solenoid Bearing is not installed, the body of the Envelope Feeder
Solenoid is visible through the peephole beside the bearing hole in the outside surface of the
Side Cover.
NOTE: Verify proper alignment of One Way Clutches to their respective gears (See (1) & (2) in Figure
11.3.5.1).
FRONT
1
2
3
4
5
6
7
8
8
10
11
12
13
14
9
J230
SAS4C9FA
www.printcopy.info
www.printcopy.info
