![background image](http://html1.mh-extra.com/html/xerox/docuprint-n17/docuprint-n17_service-manual_4131577177.webp)
3/99
Xerox DocuPrint N17 Service Manual
5-63
General Procedures/Information
TRAY 2 PROC.
ADJUSTMENT
0 to F (16 steps) [Factory default value: A]
Yes
Sets the lead edge registration
for paper fed from Tray 2.
"0" sets the narrowest lead edge registra-
tion gap. "F" sets the widest lead edge
registration gap.
Approximately 0.5mm per step.
TRAY 3 PROC.
ADJUSTMENT
0 to F (16 steps) [Factory default value: A]
Yes
Sets the lead edge registration
for paper fed from Tray 3.
"0" sets the narrowest lead edge registra-
tion gap. "F" sets the widest lead edge
registration gap.
Approximately 0.5mm per step.
TRAY 1 SCAN
ADJUSTMENT
0 to 8 (9 steps) [Factory default value: 4]
Yes
Sets the side edge registration
for paper fed from Tray 1.
"0" sets the narrowest left side edge regis-
tration gap. "8" sets the widest left side
edge registration gap.
Approximately 0.5mm per step.
TRAY 2 SCAN
ADJUSTMENT
0 to 8 (9 steps) [Factory default value: 4]
Yes
Sets the side edge registration
for paper fed from Tray 2.
"0" sets the narrowest left side edge regis-
tration gap. "8" sets the widest left side
edge registration gap.
Approximately 0.5mm per step.
TRAY 3 SCAN
ADJUSTMENT
0 to 8 (9 steps) [Factory default value: 4]
Yes
Sets the side edge registration
for paper fed from Tray 3.
"0" sets the narrowest left side edge regis-
tration gap. "8" sets the widest left side
edge registration gap.
Approximately 0.5mm per step.
FUSER TEMP.
ADJUSTMENT
0 to F (16 steps) [Factory default value: 5]
Yes
Sets the Fuser temperature.
"0" sets the lowest temperature. "F" sets
the highest temperature.
Approximately 3
o
C per step.
Message Displayed on LCD
(Top Line)
Option Values
[Factory Defaults]
Are
Changes
Possible?
Function
Option Description
www.printcopy.info
www.printcopy.info