![background image](http://html1.mh-extra.com/html/xerox/docuprint-n17/docuprint-n17_service-manual_4131577421.webp)
6/98
Xerox DocuPrint N17 Service Manual
9-19
Offset Catch Tray (OCT) Option
9.3.12 Exit Roll
Removal
1 Remove the Exit Roll Assembly (
REP 9.3.11 Exit Roll Assembly).
2 Release the left Offset Bearing and slide it towards the left on the shaft.
3 Slide the Exit Roll off the shaft towards the right.
4 Detach the right Offset Bearing from the Exit Roll.
5 Pull the shaft out towards the left together with the left Offset Bearing.
6 Remove the two Pinch Rolls and the two washers from their respective springs.
Figure 9.3.12.1 Removing the Exit Roll
Replacement
Perform the removal steps in reverse order.
SAS4ADFA
www.printcopy.info
www.printcopy.info