6/98
Xerox DocuPrint N17 Service Manual
4-33
Repair/Adjustment Procedures
4.6.10 Bottom Chute
Removal
1 Remove the Paper Handling Unit Assembly (
REP 4.5.1 Paper Handling Unit Assembly).
2 Remove the Registration Sensor (
REP 4.6.3 Registration Sensor).
3 Remove the Front Tray Chute Assembly (
REP 4.6.4 Front Tray Chute Assembly).
4 Pull out the wire harness from the junction connector (P/J 128) of the Toner Sensor.
5 Remove the screw securing the Bottom Chute on the right.
6 Remove the screw securing the right supporter to the Bottom Chute.
7 Remove the Bottom Chute from the Paper Handling Unit Assembly.
Figure 4.6.10.1 Bottom Chute Removal
Replacement
Perform the removal steps in reverse order.
SAS428F.CDR
SAS428F
www.printcopy.info
www.printcopy.info
